Zentech DF2000 Guide de dépannage Page 66
- Page / 67
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
converter box and Set-Up #1, you can watch and record one channel at a time. If you use two
converter boxes and Set-up #2, you can watch one channel while recording a different channel.
Set-up #1:
Watch and Record One Channel at a Time
Your new Converter box will come with a second coaxial wire and a remote control. Before you
begin, you should unplug the power from your TV, VCR, and antenna, if you are using an
indoor, amplified antenna.
Step 1. Unplug the existing coaxial antenna wire from your VCR “Antenna In (RF)” port.
Step 2. Plug the existing coaxial wire into the “Antenna In (RF)” port on your Converter Box.
Step 3. Using the coaxial wire that comes with your Converter Box, plug one end into the “Out
To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on
your VCR.
Leave your connection from the VCR to the TV as is (either an A/V cable or Coaxial Wire).
Step 4. Plug the power cords on your Converter Box, VCR, TV, and antenna, if you are using an
indoor, amplified antenna, into a power outlet, and turn the devices on. Tune your VCR to
channel 3 or 4 (follow the instructions in the converter box manual), and set your TV to display
video from your VCR. Using the remote that comes with your Converter Box, follow the on-
screen set-up guide to scan for available DTV channels, and begin enjoying the benefits of
Digital Television! You will be able to record programming on the channel you are tuned to on
your converter box.
Set-up #2: Watch One Channel while Recording a Different Channel
You will need your analog TV, the antenna you have been using (indoor or outdoor), the coaxial
wire that currently connects your antenna to your TV (as pictured on the far right), four
additional lengths of coaxial wire, a set of A/V cables (as pictured on the right), a 2-way splitter,
and two converter boxes. Your new Converter boxes will each come with a coaxial wire, a set of
A/V cables (three wires with red, white and yellow plugs), and a remote control. Before you
begin you should unplug the power from your TV, VCR, and antenna, if you are using an indoor,
amplified antenna.
Step 1. Unplug the existing coaxial antenna wire from your VCR “Antenna In (RF)” port.
Step 2. Unplug coaxial wire #2 from your VCR “To TV (RF)” port. Leave the other end of wire
#2 plugged in to the TV.
Step 3. Plug the existing coaxial antenna wire into the “In” port on your 2-way splitter.
66
- ANTENNAS 2
- CLOSED CAPTIONING 4
- COUPONS Back to index 5
- Back to index 9
- VIDEO DESCRIPTION 10
- Back to index 10
- DTV FAQs 11
- QUICK FACTS 11
- Back to index 12
- Back to index 14
- package and 16
- Back to index 18
- Back to 24
- DTV-Digital TV/Antennas 25
- Along US Borders 29
- SELECTED FEATURES 30
- Zentech DF 2000 Direct No 38
- Zinwell ZAT-970 Direct No 38
- Coupons 39
- Transition 42
- DTV/Reception 46
- DTV Recycle - EPA 49
- Antennas-Troubleshooting 50
- DTV – Public TV Stations 59
- Digital “Plug and Play” 61
- PO Boxes/Nursing Homes 63
- & Coupon Requests 63
- Converter Box 64
Philips DCM1075/98 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Nie Philips DCM1075/98.
Dostarczamy 1 pdf podręczników Philips DCM1075/98 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commentaires sur ces manuels